Archive for the ‘Automotive’ Category
Finding an auto mechanic is a fairly easy thing, there are probably dozens in close to your town. Looking in the phone book or checking the internet will probably turn up even more than you thought there were. Rare is the shop that is high quality and it’s not always the case that your auto mechanic can also perform auto body work as well. As a consumer it’s important to know that your vehicle is in the rights and and getting the correct service.
Auto body shows a specialty car and truck repair shops that repair things as simple as scratches scuffs and dents and onto more significant vehicle damage repair from collisions or other major accidents involving your vehicle. To receive the best work and care possible for your vehicle you’ll want to work with a company that can provide permanent repair using the best staff and latest technology; a company that does more than the bare minimum of work. One thing to look for when selecting your auto body shop is the ASE Certified stamp.
ASE Certified stands for Automotive Service Excellence. ASE is a professional certification organization that is used solely in the automotive service and repair industry. The organization has been in existence since 1972 and is an independent non-profit. Their goal was to meet the consumer demand for some sort of rating or certification system that would help them to decide where to take their vehicle for service and repairs (essentially separating the very poor shops from the best shops which hire the most skilled and experienced auto techs. The long term goal is to increase overall quality and consistency of the industry as a whole. Shops that aren’t certified are more likely to not do good work and therefore get less business. This works towards keeping the quality, certified shops in business thus increasing the industry quality as well.
ASE Certifications are acquired through ACT, Inc administered tests. The tests that can be completed are as follows: (A Series) Automobile and Light Truck, (C1) Automotive Service Consultant, (F1) Alternate Fuels, (T Series) Medium and Heavy Duty Truck, (E Series) Truck Equipment, (S Series) School Bus, (H Series) Transit Bus, (B Series) Collision Repair and Refinishing, (b6)Damage Analysis and Estimates, (M Series) Engine Machinist, (P Series) Parts Specialist, (L1) Advanced Engine Performance Specialist, (L2) Electronic Diesel Engine Diagnostics. The test, as you can see, cover a wide variety of vehicle types and services. Testing, in combination with relevant experience (most often two years) are required for receiving certification.
Not only is ASE Certification a way to show that individuals and shops are capable of dealing with automotive repair and servicing work, in many places it is required. So, be sure to inquire about ASE when you are looking for the right company to carry out your auto body work, it could save you a lot of time and hassle and produce a better result for your repair or servicing needs. So do yourself a favor and only work with ASE certified technicians.
In the recently held National Hot Rod Association Museum in Pomona, Calif, the automotive experts while discussing future of the industry, focused on the role of automotive industry technology in changing the industry and expressed concern about the availability of qualified talent. In the discussion held, the necessity to reach young people early, recruiting them in automotive industry for their career and imparting top-notch technical training to suit industry was largely emphasized. The continuous growth in the number of vehicles is likely to create new jobs for workers performing basic maintenance and repairs in global automotive industry, including USA. More entry level workers with technical trainings will be needed.
Qualified technicians with formal training, good diagnostic and problem-solving skills and training in electronics and computer field will be in demand as entry level workers. Finding talented employees with the right skills will be difficult unless they are trained by professional institutes to meet future need of automotive industry.
The key aspect to get new people into the automotive industry is to catch them young and ignite passion in them which will hence help to meet the future challenges. The industry ensures the young people great career growth along with the rise of the automotive industry future.
The challenge for technical institutes imparting technical training for automotive area is to deal with students who do not have very basic knowledge about the industry or even the names of the basic tools used. There is an influx of aspirants from the construction industry who need to be trained well for the technical automotive industry. Therefore the curriculum needs to be designed to cover the technological aspects of the automotive industry along with matching upto the level of students coming for technical training. The institutes must adjust to current and even advanced technologies so that students can handle more hybrid technology and advanced diagnostics to meet future requirement of global automotive industries.
Vocational education and technical colleges are required to help the industry meet with the requirement of its future talent by designing the perfect curriculum and also imparting appropriate training.
Automotive salvaging is typically performed at an automotive salvage yard. Cars and other vehicles are brought into these salvage yards where they are stored then likely used for any of their working parts. The automotive salvaging industry is a viable one that encourages re-use of parts that are no longer required in the vehicle of origin. Normally these cars are salvaged once the owner no longer desires to use the vehicle because of its age or condition of disrepair. The vehicle is then placed in the salvage yard, stored for an unspecified period and used at the discretion of the salvage yard owner.
The parts from a car may normally be removed by a trained mechanic or anyone who is adept at vehicular repairs and maintenance. The superficial parts like the mirrors, headlights bumper and fender may be removed first and used if they are in relatively good condition. It is of importance to note that some parts may not need to be wholly attractive to be sold. For example a scratched bumper can be purchased and resprayed to look like brand new. However for the major parts of the car including the engine, transmission and radiator, proper functioning most be observed before it can be sold. Some manufacturers will purchase non-functioning major parts and recondition them for resale. But besides the auto parts that are found in the automobile the metal from them may also be transformed into scrap metals that may be sent to recycling factories that will process the scrap metals to remake new metals for resale. These newly created metals are also very likely to be re-used in the automotive industry. The use of salvage yards is subsequently very essential in assisting in the conservation of products and raw materials. By determining ways to reuse old parts many manufacturers can reduce the production costs and development of new parts.
Maryland has a booming automotive salvaging industry like many other states across the nation. These may be located using local directories or more conveniently online sources.
Automotive Marketing Research is one of the widest topics available that can be selected for marketing purposes. It is one of the lucrative fields which have daily updates regarding launches and new products. In short is the hub of the web world when various company data is updated on the internet. Various companies here strictly mean automobile based companies.
There are various tactics that can be used in finding raw data. This raw data is vital and holds all the information. Working on such information can be difficult at times because of you have to know couple of terms which are not at all similar and heard on day to day conversations. Automotive Marketing Research can also be done through the use of various strategies that are available at disposal. Using these strategies in the right manner is important as you will brief idea about the automobile sector.
Powersports Marketing Research resides only for vehicles which have high end power. Their category is different from the rest. In this category you will only find vehicles which are used for recreational or for sports purposes. Yes, daily commuters are also available but they are rare and difficult to find. Understanding the market pattern will give you immense boost in conducting automotive marketing research.
Automobile Event Research gives you a different outlook and scenario. In this type of research you have the option to select various events that are happening around the world. These events will be different and will mostly consist of launches which are due. In these launches you can expect new products to be unveiled which are simply superb and outstanding. These products can be in any category, it should contain all the data that you are looking forward towards the launch.
Automotive Marketing Research can be conducted with the use of Online Surveys, Focus Groups, Event Research, Mail Studies and Phone Studies. These are some of the techniques that can be used to gather data. Automobile event research has the priority since it holds up lots of information which will be beneficial in the long run. It will show you how things evolve in the automobile segment. Powersports Marketing Research will also give you all the latest trends that are available in the world of automobiles. Working on such patterns will be difficult in the beginning but will eventually become easy as time passes by. You can also try the online world which is so advanced when it comes to filling of data for various research.